Hello, I also have an AX201 so I can test too:
iwlwifi0: Detected Intel(R) Wi-Fi 6 AX201 160MHz ubt0: <vendor 0x8087 product 0x0026, class 224/1, rev 2.01/0.02, addr 5> on usbus0 ugen0.6: <AX201 Bluetooth Intel Corp.> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) # iwmbtfw -DI -d ugen0.6 main: opening dev 0.6 iwmbt_is_supported: found iwmbtfw compatible main: Firmware has already been downloaded main: Firmware download is successful! # service bluetooth start ubt0 /etc/rc.d/bluetooth: ERROR: Unable to setup Bluetooth stack for device ubt0 <dmesg> ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout # hccontrol -n ubt0hci inquiry <shows nothing> Cheers! Lars Tunkrans <drsn...@gmail.com> escreveu (quinta, 31/07/2025 à(s) 05:40): > Hi. The reset loop inthe patch to th rc.d/bluetooth script is looped > once on my laptop , the second reset attempt works. It appers to > improve the script. > After a laptop reboot the BT stack appers to be active, before running > the rc.d/bluetooth script. > Script needs to be run with STOP argument before it can be run with START > argument. > > Not clear whats the cause of this behavior. > > //Lars. > > > > Den tis 29 juli 2025 17:21Bjoern A. Zeeb <b...@freebsd.org> skrev: > >> On Tue, 22 Jul 2025, Lars Tunkrans wrote: >> >> Hi, >> >> let me re-cap: >> >> (1) the changes to the startup script helped -- so I should go ahead and >> push them in? >> >> (2) there is a check missing somewhere loading BT despite it not being >> enabled in rc.conf? >> >> /bz >> >> -- >> Bjoern A. Zeeb r15:7 >> > -- Nuno Teixeira FreeBSD UNIX: <edua...@freebsd.org> Web: https://FreeBSD.org
