|
You
trying to get the two units into bridging mode?
Intel
2011b (AKA Symbol) needs WLAP mode enabled firstly. Do that under the
administrator options.
Secondly, I 'think' they only bridge to matching units, specifically the
2011, 2011b plus possibly Symbol units.
Cheers
Nigel
Nigel Ballard
Chief Strategist Appear Networks
Email:
[EMAIL PROTECTED]
WWW: www.appearnetworks.com
WWW: www.joejava.com
----- Original Message -----
Sent: Friday, May 10, 2002 8:04 PM
Subject: connect SMC2655W w/ Intel 2011B
Hello!
I have a problem in trying to connect SMC
2655W(Linksys AP11) with Intel 2011B.The connection exists but traffic
goes only oneway.
The Intel AP sees the other device only with
radio but not the ethernet port. I think the problem is in Intel because
It is setted to work in AP mode and expects to see only mobile units or
APs.And the MU is only adapter which takes the MAC address of ethernet adapter
of PC on which it is connected.
I tried to set all modes of SMC bridge(
LInksys) - bridge p2p,point to multipoint and AP and APclient. All the
same. Traffic goes only from SMC( WAP11) to Intel but not in other
direction.Both devices have the MAC adresses of each other in MAC
tables.
Please help me if you have any idea.
p.s firmware: Linksys 1.4i1
SMC 1.4h9
Intel
3.00-19
| 