bcorwin wrote: >is there a limit to how far a COR can be located from the T1 box? The two >are connected via an ethernet cable. >I would like to move my antenna onto the peak of a roof instead of a radio >tower, so the LMR600 cable could be only a few feet long, instead of 75ft. >But, the T1 is located about 100 ft. away from the roof peak. Is there a >distance limit to the ethernet cable? > >thanks, > > b.t. corwin > >-- >general wireless list, a bawug thing <http://www.bawug.org/> >[un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless > > 10BaseT, which is part of the IEEE 802.3 specification, has a distance limit of approximately 328 feet (100 meters) per segment. 100 Base-Tx: 100-Mbps baseband Fast Ethernet specification using two pairs of either UTP or STP wiring. The first pair of wires receives data; the second transmits data. To guarantee the proper signal timing, a 100BaseTX segment cannot exceed 328 feet (100 meters) in length.
Sameer -- Sameer Verma Asst. Prof. of Information Systems San Francisco State University San Francisco, CA 94132 USA http://verma.sfsu.edu/ -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
