Hi,
I'm having a problem with Cisco BR342 and BR350.
My sytem:
1- BR350
| |
| Clients
|
2- BR342 ( root: off, bridge mode: access_point )
| |
| Clients
|
3- BR342 ( root: off, bridge mode: access_point )
|
Clients
I'm having two diferent problems.
1- When i set BR350 in mode "Root Access Point", i get the error:
Station [2- BR342] Failed Association, status "Can Not Support All
Requested Capabilities"
At the BR350 logs. And the "2 -BR342" do not associate.
2- When i set BR350 in mode "Root Bridge" it works only when i turn on
first the BR350. If the BR342 are turned on before the BR350, i get a lot
of mesages:
"E Radio Error : 34 Buffer full frames lost"
"E Radio Error : 98 Buffer full frames lost"
"E Radio Error : 76 Buffer full frames lost"
"E Radio Error : XX Buffer full frames lost"
At the BR342 logs. And the BR342 do not associate with anyone (i wait more
than a hour). So i have to restart first the BR350 and then the BR342s.
All the other config, in the 3 Cisco BR, are DEFAULT. i ONLY changed SSID,
Parent (to force BR342 to associate to the correct parent) and the
operational mode as show above.
The problem is that the Bridges will be in a place of very difficult
access, so the connection need to be rock solid. If for any reason the
Bridges disassociate, they need to associate without needing to restart.
Anyone has an idea ?
Thank You and sorry for my poor english,
Ulisses
--
general wireless list, a bawug thing <http://www.bawug.org/>
[un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
