I found the problem.
In BR342, you have to disable the "Allow proprietary extensions" and enable the "Allow broadcast SSID" ....... and now everthing works very well. All the Client APs are working now, WAP11 v1.1 and v 2.2 and DWL-950+. Thank You At 23:56 6/10/2002 +1000, you wrote: >Hello Ulisses, > >Hmm I'll pass that info on to other people that have told me other >wise in the past... > >cisco do have much better RX/TX then the cheaper linksys/dlink >devices... > >So if it's distance, I'd say it's chipset/interference that's the problem... > >-- >Best regards, > evilbunny mailto:[EMAIL PROTECTED] > >http://www.cacert.org - Free Security Certificates >http://www.sydneywireless.com - Telecommunications Freedom > >Sunday, October 6, 2002, 11:52:47 PM, you wrote: > > >U> But one near another, about 100 meters, both, D-Link and Linksys WAP11 >v2.2 >U> works fine conected to the BR342. The BR342 is in "Access Point" mode. > >U> Jensen > >U> At 15:55 6/10/2002 +1000, evilbunny wrote: > >>Hello Ulisses, > >> > >>WAP11's will only connect in client mode to other WAP11's > >> > >>it's a software limitation, same thing with the cisco... and most > >>other brands for that matter... > >> > >>-- > >>Best regards, > >> evilbunny mailto:[EMAIL PROTECTED] > >> > >>http://www.cacert.org - Free Security Certificates > >>http://www.sydneywireless.com - Telecommunications Freedom > >> > >>Sunday, October 6, 2002, 3:02:30 PM, you wrote: > >> > >> > >>U> Hi, > >> > >>U> i have a BR342 acting as a AP. I always used WAP11 v1.1 to make 1 or 2 > >>U> miles distance links conected to the BR342. > >> > >>U> Now i'm trying to do the same with a WAP11 v2.2, but it can't > connect. The > >>U> BR342 do not show any attempt of connection from WAP11 v2.2. I just set > >>the > >>U> SSID and the "AP Client" mode ... all the other options are default. It > >>U> has the latest firmware. i also tried to put a 1 W amp on the WAP11 > v2.2, > >>U> but the same problem happened. > >> > >>U> So i've tried the D-Link 950+ also in "AP Client" mode, and the problem > >>was > >>U> the same. > >> > >>U> The strange is that my old WAP11 v1.1 keep working very well. > >> > >>U> Any idea ? > >> > >>U> Thanks, > >>U> Jensen > >> > >>U> -- > >>U> general wireless list, a bawug thing <http://www.bawug.org/> > >>U> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
