Hello all, great list! I recently setup a ~1300' link using 2 - WAP11s (v1.1, firmware 1.4i? I believe) and 2 - 13dbi patches. One was in Access Point mode and the other AP Client mode. All worked well.
I moved one of the APs and at the same time decided to try swap the modes of the APs. But for some reason I couldn't connect to one of the APs using the ATMEL tool or Linksys' snmp tool (Access Point not found). So I tried the USB config utility (v1.7d.2.9). When I plug the USB cable in it tries to load the driver but blue screens (Windows 2000 Pro). Exception mode not handled... and it references either the file BridDFU.sys or BridDFU.inf. I have tried completely uninstalling, rebooting, reinstalling, tried another computer, etc. So it appears to be a problem within the AP. How can I reset the AP if I can't connect to it? I've tried powering it down for a minute or so. Linksys Tech support stumbled through their script and decided I needed to send it back (it's under warranty). I would prefer not to be down that long If I have any other options! Any ideas appreciated... and thanks in advance. Willi -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
