I know this looks pretty similiar to the guts of a wusb11 version 2.6 and in there you just solder to the d4 or d5 pads... you can easily test with an antenna from a wap11 with a cut pigtail attached and simply touch the contacts while it is plugged in and the config utility is opened and reading the signal. you'll see a good boost when you get it right. good luck, that cut pigtail could be permanently soldered to the board if you lined it up right...
----- Original Message ----- From: "Brad Pillatsch" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, November 07, 2002 7:08 PM Subject: [BAWUG] WPC11 Antenna Connection > I removed the back plastic cover from my linksys WPC11 and noticed that the > component labeled SW1 looked verymuch like some type of antenna connection. > Others have just desoldered this component and placed a mmcx or other type > of connector on there however i think that this is allready a connector. > Here is a link to a high res scan of the back of the card. What do you guys > think? > > http://simon.barber.net/linksys/linksys_bottom.jpg > > - Brad Pillatsch, EET > > -- > general wireless list, a bawug thing <http://www.bawug.org/> > [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
