John
I have a few customers doing this and can provide you with there feed
back:
1. Our 200mW card (which really does output 200mW+) needs 720mA
to work at full output levels. The WET11 can not handle this.
2. They work fine with our 100mW cards that only need 420mA
3. Version 1.43 on the wet11 seems to be the most stable
4. Version 1.49 on our cards seems to be the most stable
Sincerely, Tony Morella
Demarc Technology Group, A Wireless Solution Provider
Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202
http://www.demarctech.com
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of John Foust
> Sent: Monday, March 24, 2003 9:24 AM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: [BAWUG] WET-11 upgrades?
>
>
>
> There's a thread back in January regarding how the WET-11
> can be upgraded to 100-200 mW by replacing the PCMCIA radio
> with other PRISM 2, 2.5 and 3, Orinoco or Senao.
>
> I'm curious to hear anecdotes from people who've tried this,
> with which cards, with what results, and with which firmware,
> with or without WEP, etc.
>
> I'd also like to find someone who has WET-11 working with WEP
> where the access point is a Cisco Aironet AP-352.
>
> - John
>
> --
> general wireless list, a bawug thing <http://www.bawug.org/>
> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
>
>
--
general wireless list, a bawug thing <http://www.bawug.org/>
[un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
