That's a bypass capacitor and its value is not critical. It's marked "AA7" and I'm not familiar enough with surface mount components to tell you what that means, but 0.1�f is a common value for a bypass capacitor.
It's likely the active components are more sensitive to the overvoltage than the capacitor and you're better off accepting the loss of the WAP11 than to mess with it. In fact, the loss of that bypass capacitor might affect the operation of the WAP11, but on some level it should continue to operate without C26. If you follow those traces you will see that C26 is between power and ground. My advice is to throw it away and get a new access point. Don W. P.S. -- Don't feel too bad, Dave did the same thing (see http://tinyurl.com/dax6) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeff Homan Sent: Monday, June 02, 2003 4:13 PM To: [EMAIL PROTECTED] Subject: [BAWUG] WAP11 Blown Capacitor - Looking for Value of C26 Hello All, This is my first post, and I searched google for an answer, and couldn't find one. Well, to start off, I goofed up. I have several Linksys products at home and I accidentally put the wrong power supply in my WAP11. I don't know if anyone has ever opened their's up at all, but I blew a capacitor on the non-PCMCIA portion of the board in the casing. It's cap number C26 and I can't get the value off of it. If anyone can let me know what the markings are on this component, I would really appreciate it. Thank you very much for any help you are able to give! Jeff -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
