I also just tried to setup the DWL-900AP+ as a wireless client (basic setup) following the d-link tech's instructions. still no luck, can't ping the gateway (BEFW11S4). since I obviously don't undertstand what needs to happen, i'll provide more technical details:
AP1, BEFW11S4 Linksys Lan IP/MAC: 192.168.1.1/xx-xx-xx-xx-8a-85 wireless MAC: xx-xx-xx-xx-5c-92 wan IP/MAC: 66.xx.xx.xx/xx-xx-xx-xx-8a-86 DHCP serves 192.168.1.100-150 ssid is 'linksys' 1 wan 10/100 port 4 or 5 lan 10/100 ports AP2, DWL-900AP+ configured with static lan IP address 192.168.1.130 subnet 255.255.255.0 and gateway 192.168.1.1 (also tried without gateway) configured wireless client AP mode with remote AP MAC set to xx-xx-xx-xx-8a-85 (tried all 3 MACS, no luck) configured ssid of linksys 1 10/100 Lan port wired-pc1 (can't ping gateway 192.168.1.1) configured static address 192.168.1.126 subnet 255.255.255.0 gateway 192.168.1.1 connected to Lan port of AP2 via switch (i know the connection is working because i can connect to management console of AP2) AP2 does bridging also but i believe i need bridge mode on the recieving end also. But then i think i would lose other functionality since most of these routers only operate in one mode. So ATM i'm thinking that I need to return the DWL-900AP+ for another device? any ideas for what type of hardware i need? or a config i missed? thanks, milan -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
