One side has a 17dbi pannel antenna the other has a 24dbi grid. The side with the pannel is on the top of the tallest building in Omaha. It's very likely that there is noise at fault, but I'm out of things to try to get around it.
-----Original Message----- From: Jason Straight [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 22, 2003 11:37 PM To: [EMAIL PROTECTED] Subject: Re: [BAWUG] Uneven speeds over a point to point link What types of equipment are on each end? are both ends of the PtP equally gained? ie. same radio, same cable run, same antenna? Is it possible that one link isn't getting as much power to the other, or that there is more noise causing packet loss and auto negotiating speed fallback? On Tuesday 22 July 2003 22:46, Westman, Michael (324) wrote: > I've got a couple of point to point links that have transfer speeds that > don't match. All of the radios associate at 11meg but some will transfer a > good 5meg in one way but only 2.5meg in the other direction. Like I said > these are all point to point links with only two radios. > > Any ideas what would cause this? > > Thanks > Mike > -- > general wireless list, a bawug thing <http://www.bawug.org/> > [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless -- Jason Straight [EMAIL PROTECTED] icq: 1796276 pgp: http://www.JeetKuneDoMaster.net/~jason/pubkey.asc -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
