>I don't have more then 1 wireless device to test, but it seems like >my firewall rules for the linux box seem to let anything on the >10.0.0.2 (speedstream port) thru once someone authenticates to the >nocat .. is this right? or is the firewall (iptables) going to >properly catch that the requests from 10.0.0.2 are really NAT'ed and >that it has to properly auth each persons session.
Bryan - It sounds like your config is working as it should the way you have it configured. There may be a module you can load on the gateway that will do deeper packet inspection on the masqueraded traffic, but I'm not sure. If I were you, I would just do away with the intermediate network (10.x.x.x) and plug the linux box directly into one of the standard eth jacks on the speedstream. That way you won't be nat'ing, just bridging. You should be able to use the Speedstream or the gateway for a DHCP server. Hope this helps, David -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
