The CPE config is follow:
Wireless card a Teletronics 2Mbps WL2400 in AP Mode with essid : mar_ini.
Device Ether1 ip: 192.168.1.10 mask 255.255.255.0 Device Wlan1 ip: 10.10.1.1 mask 255.255.255.0 Satatic Route Defaulta Gateway 192.168.1.1
1:1 IP maping & NAT
client="ether1"
masq from 10.10.1.0/24 to dev $client
and some rules of CBQ
The WET11 Config IP 10.10.1.2 mask 255.255.255.0 GateWay 10.10.1.1
essid : mar_ini
Client Pc IP 10.10.1.3 connected to WET11
I can Ping from PC Client( ip 10.10.1.3) to CPE wlan1 10.10.1.1, and ping to CPE Ether1 192.168.1.10 but can't ping to 192.168.1.1 (This is a Linux Proxy Server conencted to internet).
I need help in Teletronics CPE config, i read the user manual, but i not understand the static routing and NAT...
Thanks
Sincerely
Jesus M. Macias Zacatecas, Mexico
_________________________________________________________________
Charla con tus amigos en l�nea mediante MSN Messenger: http://messenger.microsoft.com/es
-- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
