---------- Forwarded message ---------- From: Aljoša Dorni <jos...@gmail.com> Date: 2011/3/18 Subject: Re: [Ninux-Wireless] alice gate plus To: "ZioPRoTo (Saverio Proto)" <ziopr...@gmail.com>
Adesso su due piedi posso postarti il bootlog che mi fornisce il firmware us robotics modificato da roleo (credo) proprio per questo router. Bootlog: Linux version 2.6.8.1 (root@sarge) (gcc version 3.4.2) #1 Tue Feb 22 21:05:02 CET 2011 Parallel flash device: name AM29LV320MT, id 0x2201, size 8192KB Total Flash size: 8192K with 135 sectors ***Board is not initialized****: Using the default PSI size: 24 AliceAGW2+ prom init CPU revision is: 00029107 mpi: No Card is in the PCMCIA slot Determined physical RAM map: memory: 00fa0000 @ 00000000 (usable) On node 0 totalpages: 4000 DMA zone: 4000 pages, LIFO batch:1 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: root=31:0 ro noinitrd brcm mips: enabling icache and dcache... Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes. Primary data cache 8kB 2-way, linesize 16 bytes. PID hash table entries: 64 (order 6: 512 bytes) Using 128.000 MHz high precision timer. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 13696k/16000k available (1620k kernel code, 2284k reserved, 243k data, 80k init, 0k highmem) Calibrating delay loop... 255.59 BogoMIPS Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Checking for 'wait' instruction... unavailable. NET: Registered protocol family 16 Can't analyze prologue code at 801a3a54 SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub Initializing Cryptographic API PPP generic driver version 2.4.2 NET: Registered protocol family 24 Using noop io scheduler bcm963xx_mtd driver v1.0 PCI: Enabling device 0000:00:02.2 (0000 -> 0002) ehci_hcd 0000:00:02.2: EHCI Host Controller PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: irq 32, pci mem b0030000 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:02.2: SCAN SetPortFeature wIndex=1 ports=2 ehci_hcd 0000:00:02.2: SCAN wValue =8 ehci_hcd 0000:00:02.2: SCAN SetPortFeature wIndex=2 ports=2 ehci_hcd 0000:00:02.2: SCAN wValue =8 ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 PCI: Enabling device 0000:00:02.0 (0000 -> 0002) ohci_hcd 0000:00:02.0: OHCI Host Controller PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 32, pci mem b0010000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected PCI: Enabling device 0000:00:02.1 (0000 -> 0002) ohci_hcd 0000:00:02.1: OHCI Host Controller PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: irq 32, pci mem b0020000 ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected PCI: Enabling device 0000:00:09.0 (0000 -> 0002) ohci_hcd 0000:00:09.0: OHCI Host Controller PCI: Setting latency timer of device 0000:00:09.0 to 64 ohci_hcd 0000:00:09.0: irq 20, pci mem c0000b00 ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:09.0: init err ohci_hcd 0000:00:09.0: can't start ohci_hcd 0000:00:09.0: init error -16 ohci_hcd 0000:00:09.0: remove, state 0 iounmap: bad address c0000b00 ohci_hcd 0000:00:09.0: USB bus 4 deregistered ohci_hcd: probe of 0000:00:09.0 failed with error -16 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usbcore: registered new driver usbnet brcmboard: brcm_board_init entry Confirm button interrupt has been configured bcm963xx_serial driver v2.0 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 512 bind 1024) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Ebtables v2.0 registered NET: Registered protocol family 8 NET: Registered protocol family 20 802.1Q VLAN Support v1.8 Ben Greear <gree...@candelatech.com> All bugs added by David S. Miller <da...@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 80k freed Algorithmics/MIPS FPU Emulator v1.5 atmapi: module license 'Proprietary' taints kernel. blaadd: blaa_detect entry adsl: adsl_init entry Broadcom BCMPROCFS v1.0 initialized Broadcom BCM6348B0 Ethernet Network Device v0.3 Mar 22 2006 13:46:12 Config Internal PHY Through MDIO BCM63xx_ENET: Auto-negotiation timed-out BCM63xx_ENET: 10 MB Half-Duplex (assumed) eth0: MAC Address: 00:19:3E:11:40:8C Broadcom BCM6348B0 Ethernet Network Device v0.3 Mar 22 2006 13:46:12 Config Ethernet Switch Through SPI Slave Select 0 eth1: MAC Address: 00:19:3E:11:40:8D dgasp: kerSysRegisterDyingGaspHandler: eth1 registered Broadcom BCM6348B0 USB Network Device v0.4 May 16 2006 15:44:12 usb0: MAC Address: 00 19 3E 11 40 8E usb0: Host MAC Address: 00 19 3E 11 40 8F PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Enabling device 0000:00:01.0 (0004 -> 0006) wl: srom not detected, using main memory mapped srom info (wombo board) wl0: wlc_attach: using main board MAC address base in NVRAM (wombo board) wl0 MAC Address: 00:19:3E:11:40:90 wl0: Broadcom BCM4318 802.11 Wireless Controller 3.131.35.0.cpe0.0 dgasp: kerSysRegisterDyingGaspHandler: wl0 registered fuse init (API version 7.8) fuse distribution version: 2.7.3 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. BcmAdsl_Initialize=0xC0058218, g_pFnNotifyCallback=0xC006DB14 pSdramPHY=0xA0FFFFF8, 0xDEFEFFDD 0xDDFFFEFD AdslCoreHwReset: AdslOemDataAddr = 0xA0FF68B0 dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (125 buckets, 0 max) - 368 bytes per conntrack ip_conntrack_pptp version 2.1 loaded ip_nat_pptp version 2.0 loaded ip_conntrack_h323: init ip_nat_h323: initialize the module! ip_conntrack_rtsp v0.01 loading ip_nat_rtsp v0.01 loading device usb0 entered promiscuous mode br0: port 1(usb0) entering learning state br0: topology change detected, propagating br0: port 1(usb0) entering forwarding state device eth0 entered promiscuous mode br0: port 2(eth0) entering learning state br0: topology change detected, propagating br0: port 2(eth0) entering forwarding state device eth1 entered promiscuous mode br0: port 3(eth1) entering learning state br0: topology change detected, propagating br0: port 3(eth1) entering forwarding state Country stored in PSI is IT device wl0 entered promiscuous mode br0: port 4(wl0) entering learning state br0: topology change detected, propagating br0: port 4(wl0) entering forwarding state device wl0.1 entered promiscuous mode br0: port 2(eth0) entering disabled state br0: port 3(eth1) entering disabled state br0: port 1(usb0) entering disabled state eth1 Link UP. br0: port 3(eth1) entering learning state br0: topology change detected, propagating br0: port 3(eth1) entering forwarding state ciao Il 18 marzo 2011 12:46, ZioPRoTo (Saverio Proto) <ziopr...@gmail.com> ha scritto: >> posta un bootlog, sei al battlemesh? > > no di italiano siamo io e Clauz, Ninux Pisa (al completo), Ninux > trento (antonio), e dovrebbe arrivare filippo ma ancora non si è visto > ! > > Saverio > -- Aljosa Dorni -- Aljosa Dorni _______________________________________________ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless