Vi invio configurazione del router e schema di collegamento Grazie Nicola
Schema config rete<https://docs.google.com/drawings/d/1DN7WDppIeq1nMBKMlvJ_Sfjtvsy7brlgKMM9IBm47ms/edit?usp=drive_web> antenna 192-168-1-170.png<https://docs.google.com/file/d/0B-UkxkMKFmofcEpYLU1aSno5d2M/edit?usp=drive_web> router 192-168-1-160.png<https://docs.google.com/file/d/0B-UkxkMKFmofRk5kQ0l6dHFoTHc/edit?usp=drive_web> root@OpenWrt:~# cat /etc/config/network config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config interface 'lan' option proto 'static' option netmask '255.255.255.0' option ipaddr '192.168.1.160' option _orig_ifname 'eth1' option _orig_bridge 'false' option ifname 'eth1.7' option gateway '192.168.1.1' option dns '192.168.1.1' config interface 'wan' option ifname 'eth0' option proto 'dhcp' config switch option name 'switch0' option reset '1' option enable_vlan '1' config switch_vlan option device 'switch0' option vlan '1' option vid '1' option ports '0t 1t 2t 3t 4t' config switch_vlan option device 'switch0' option vlan '2' option ports '0t 3t' option vid '3' config interface 'antenna_1' option proto 'static' option ifname 'eth1.3' option ipaddr '172.22.66.10' option netmask '255.255.0.0' option gateway '192.168.1.160' config switch_vlan option device 'switch0' option vlan '3' option ports '0t 1 2 3t 4' option vid '7' e questo é il firewall root@OpenWrt:~# cat /etc/config/firewall config defaults option syn_flood '1' option input 'ACCEPT' option output 'ACCEPT' option forward 'ACCEPT' config zone option name 'lan' option input 'ACCEPT' option output 'ACCEPT' option forward 'ACCEPT' option network 'lan' config zone option name 'wan' option network 'wan' option input 'REJECT' option output 'ACCEPT' option forward 'REJECT' option masq '1' option mtu_fix '1' config rule option name 'Allow-DHCP-Renew' option src 'wan' option proto 'udp' option dest_port '68' option target 'ACCEPT' option family 'ipv4' config rule option name 'Allow-Ping' option src 'wan' option proto 'icmp' option icmp_type 'echo-request' option family 'ipv4' option target 'ACCEPT' config rule option name 'Allow-DHCPv6' option src 'wan' option proto 'udp' option src_ip 'fe80::/10' option src_port '547' option dest_ip 'fe80::/10' option dest_port '546' option family 'ipv6' option target 'ACCEPT' config rule option name 'Allow-ICMPv6-Input' option src 'wan' option proto 'icmp' list icmp_type 'echo-request' list icmp_type 'echo-reply' list icmp_type 'destination-unreachable' list icmp_type 'packet-too-big' list icmp_type 'time-exceeded' list icmp_type 'bad-header' list icmp_type 'unknown-header-type' list icmp_type 'router-solicitation' list icmp_type 'neighbour-solicitation' list icmp_type 'router-advertisement' list icmp_type 'neighbour-advertisement' option limit '1000/sec' option family 'ipv6' option target 'ACCEPT' config rule option name 'Allow-ICMPv6-Forward' option src 'wan' option dest '*' option proto 'icmp' list icmp_type 'echo-request' list icmp_type 'echo-reply' list icmp_type 'destination-unreachable' list icmp_type 'packet-too-big' list icmp_type 'time-exceeded' list icmp_type 'bad-header' list icmp_type 'unknown-header-type' option limit '1000/sec' option family 'ipv6' option target 'ACCEPT' config include option path '/etc/firewall.user' config forwarding option dest 'wan' option src 'lan' config zone option name 'ninux' option input 'ACCEPT' option forward 'ACCEPT' option output 'ACCEPT' option network 'antenna_1' config forwarding option dest 'lan' option src 'ninux' config forwarding option dest 'ninux' option src 'lan' Il giorno 11 aprile 2014 16:17, Nicola Ruscitto <nicolaruscitt...@gmail.com>ha scritto: > Dimenticavo, > le antenne sono due Tp-Link wa7510n e il router é Tp-Link wr841n > > Grazie > Nicola > > > Il giorno 11 aprile 2014 14:26, Nicola Ruscitto < > nicolaruscitt...@gmail.com> ha scritto: > > Vi invio configurazione del router e schema di collegamento (in allegato) >> Grazie >> Nicola >> >> root@OpenWrt:~# cat /etc/config/network >> >> config interface 'loopback' >> option ifname 'lo' >> option proto 'static' >> option ipaddr '127.0.0.1' >> option netmask '255.0.0.0' >> >> config interface 'lan' >> option proto 'static' >> option netmask '255.255.255.0' >> option ipaddr '192.168.1.160' >> option _orig_ifname 'eth1' >> option _orig_bridge 'false' >> option ifname 'eth1.7' >> option gateway '192.168.1.1' >> option dns '192.168.1.1' >> >> config interface 'wan' >> option ifname 'eth0' >> option proto 'dhcp' >> >> config switch >> option name 'switch0' >> option reset '1' >> option enable_vlan '1' >> >> config switch_vlan >> option device 'switch0' >> option vlan '1' >> option vid '1' >> option ports '0t 1t 2t 3t 4t' >> >> config switch_vlan >> option device 'switch0' >> option vlan '2' >> option ports '0t 3t' >> option vid '3' >> >> config interface 'antenna_1' >> option proto 'static' >> option ifname 'eth1.3' >> option ipaddr '172.22.66.10' >> option netmask '255.255.0.0' >> option gateway '192.168.1.160' >> >> config switch_vlan >> option device 'switch0' >> option vlan '3' >> option ports '0t 1 2 3t 4' >> option vid '7' >> >> >> e questo é il firewall >> >> root@OpenWrt:~# cat /etc/config/firewall >> >> config defaults >> option syn_flood '1' >> option input 'ACCEPT' >> option output 'ACCEPT' >> option forward 'ACCEPT' >> >> config zone >> option name 'lan' >> option input 'ACCEPT' >> option output 'ACCEPT' >> option forward 'ACCEPT' >> option network 'lan' >> >> config zone >> option name 'wan' >> option network 'wan' >> option input 'REJECT' >> option output 'ACCEPT' >> option forward 'REJECT' >> option masq '1' >> option mtu_fix '1' >> >> config rule >> option name 'Allow-DHCP-Renew' >> option src 'wan' >> option proto 'udp' >> option dest_port '68' >> option target 'ACCEPT' >> option family 'ipv4' >> >> config rule >> option name 'Allow-Ping' >> option src 'wan' >> option proto 'icmp' >> option icmp_type 'echo-request' >> option family 'ipv4' >> option target 'ACCEPT' >> >> config rule >> option name 'Allow-DHCPv6' >> option src 'wan' >> option proto 'udp' >> option src_ip 'fe80::/10' >> option src_port '547' >> option dest_ip 'fe80::/10' >> option dest_port '546' >> option family 'ipv6' >> option target 'ACCEPT' >> >> config rule >> option name 'Allow-ICMPv6-Input' >> option src 'wan' >> option proto 'icmp' >> list icmp_type 'echo-request' >> list icmp_type 'echo-reply' >> list icmp_type 'destination-unreachable' >> list icmp_type 'packet-too-big' >> list icmp_type 'time-exceeded' >> list icmp_type 'bad-header' >> list icmp_type 'unknown-header-type' >> list icmp_type 'router-solicitation' >> list icmp_type 'neighbour-solicitation' >> list icmp_type 'router-advertisement' >> list icmp_type 'neighbour-advertisement' >> option limit '1000/sec' >> option family 'ipv6' >> option target 'ACCEPT' >> >> config rule >> option name 'Allow-ICMPv6-Forward' >> option src 'wan' >> option dest '*' >> option proto 'icmp' >> list icmp_type 'echo-request' >> list icmp_type 'echo-reply' >> list icmp_type 'destination-unreachable' >> list icmp_type 'packet-too-big' >> list icmp_type 'time-exceeded' >> list icmp_type 'bad-header' >> list icmp_type 'unknown-header-type' >> option limit '1000/sec' >> option family 'ipv6' >> option target 'ACCEPT' >> >> config include >> option path '/etc/firewall.user' >> >> config forwarding >> option dest 'wan' >> option src 'lan' >> >> config zone >> option name 'ninux' >> option input 'ACCEPT' >> option forward 'ACCEPT' >> option output 'ACCEPT' >> option network 'antenna_1' >> >> config forwarding >> option dest 'lan' >> option src 'ninux' >> >> config forwarding >> option dest 'ninux' >> option src 'lan' >> >> >> >> Il giorno 11 aprile 2014 11:14, Saverio Proto <ziopr...@gmail.com> ha >> scritto: >> >> Non si capisce il setup. >>> Inviaci: >>> schema connessione apparati coinvolti >>> configurazione IP interfacce apparati. >>> >>> Saverio >>> >>> Il 11 aprile 2014 09:54, Nicola Ruscitto <nicolaruscitt...@gmail.com> >>> ha scritto: >>> > Buongiorno, >>> > avrei bisogno di un aiutino in merito alla configurazione del ground >>> routing >>> > che sto provando in questi giorni. Sto utilizzando una CPE con openwrt >>> e >>> > pacchetto "trelay" installato e un router tplink sempre con openwrt e >>> > pacchetto olsrd. L'altra CPE invece ha solo openwrt e olsr. >>> > >>> > Le antenne stanno nella sottorete 172.22.0.0 mentre la rete locale l'ho >>> > lasciata sulla 192.168.1.0 >>> > >>> > Praticamente funziona tutto ovvero olsrd in esecuzione sul ground >>> router >>> > vede il vicino ed aggiorna la tabella di routing. Tuttavia l'IP dell' >>> > antenna remota non é pingabile nonostante abbia settato i forwarding >>> tra le >>> > dua interfacce (LAN e VLAN dati). >>> > >>> > Viceversa, se vado sull'altra antenna riesco a fare un ping sulla prima >>> > antenna. >>> > >>> > Cosa ho tralasciato? >>> > >>> > Grazie >>> > Nicola >>> > >>> > >>> > Il giorno 06 aprile 2014 17:26, Nicola Ruscitto < >>> nicolaruscitt...@gmail.com> >>> > ha scritto: >>> > >>> >> Ciao ragazzi, >>> >> la prova del router a terra con radio wa7510n openwrt ha dato esiti >>> >> positivi. Una volta impostate le vlan e caricato il modulo trelay >>> >> sull'antenna così come suggerito sulla guida, il router ha aggiornato >>> la sua >>> >> tabella di routing aggiungendo il vicino. >>> >> >>> >> Saluti >>> >> Nicola >>> > >>> > >>> > >>> > _______________________________________________ >>> > Wireless mailing list >>> > Wireless@ml.ninux.org >>> > http://ml.ninux.org/mailman/listinfo/wireless >>> > >>> _______________________________________________ >>> Wireless mailing list >>> Wireless@ml.ninux.org >>> http://ml.ninux.org/mailman/listinfo/wireless >>> >> >> >
_______________________________________________ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless
