ricercando in rete un problema simile o uguale è questo: https://community.ubnt.com/t5/airOS-Software-Configuration/Client-isolation-WDS/td-p/1168067
Il giorno 1 settembre 2017 10:20, Claudio <clau...@gmail.com> ha scritto: > questa è la configurazione del wdr3600. Ho escluso la conf. che non > interessa > > config interface 'lan' > option force_link '1' > option type 'bridge' > option proto 'static' > option netmask '255.255.255.0' > option _orig_ifname 'eth0.1 radio0.network1 radio1.network1' > option _orig_bridge 'true' > option ipaddr '10.94.90.1' > option dns '8.8.8.8 8.8.4.4' > option ifname 'eth0.10' > > config switch > option name 'switch0' > option reset '1' > option enable_vlan '1' > option mirror_source_port '0' > option mirror_monitor_port '0' > > config switch_vlan > option device 'switch0' > option vlan '2' > option ports '0t 1' > option vid '2' > > config switch_vlan > option device 'switch0' > option vlan '3' > option ports '0t 5t' > option vid '9' > > config switch_vlan > option device 'switch0' > option vlan '4' > option ports '0t 2 3 4t 5t' > option vid '10' > > config switch_vlan > option device 'switch0' > option vlan '5' > option ports '0t 4t' > option vid '8' > > > il Bridge dell'antenna è: > > LAN0.9+WLAN0 > > > > Il giorno 1 settembre 2017 08:08, Alessandro Gnagni <alessan...@gnagni.it> > ha scritto: > >> Hai wds acceso su tutte e tre, due si collegano all'ap. Puoi farmi vedere >> la configurazione del bridge sull'ap? >> >> Il 31 ago 2017 14:07, "Claudio" <clau...@gmail.com> ha scritto: >> >>> Da cosa può dipendere che le stazioni CPE + groundrouter continuano a >>> vedersi nella tabella di routing di olsr come collegati in mesh nonostante >>> abbia selezionato la configurazione delle antenne con wds + client >>> isolation ? >>> >>> stazione1 >>> Neighbour IP Hostname Interface Local interface IP LQ NLQ ETX SNR >>> 172.31.90.91 ? nsm5ale 172.31.90.107 1.000 1.000 1.000 ? >>> 172.31.90.97 ? nsm5ale 172.31.90.107 1.000 1.000 1.000 ? >>> >>> Stazione2 >>> Neighbour IP Hostname Interface Local interface IP LQ NLQ ETX SNR >>> 172.31.90.104 ? antenna2port3 172.31.90.98 1.000 1.000 1.000 ? >>> 172.31.90.91 ? antenna1port4 172.31.90.97 1.000 1.000 1.000 ? >>> 172.31.90.107 ? antenna1port4 172.31.90.97 1.000 1.000 1.000 ? >>> >>> AP >>> 172.31.90.95 ? antenna2port3 172.31.90.92 1.000 1.000 1.000 ? >>> 172.31.90.97 ? antenna1port4 172.31.90.91 1.000 1.000 1.000 ? >>> 10.94.0.1 ? ninuxvpn 10.94.0.2 1.000 1.000 1.000 ? >>> 172.31.90.107 ? antenna1port4 172.31.90.91 1.000 1.000 1.000 ? >>> >>> ho provato con diversi router sia con lede che openwrt ma in uno dei due >>> router ricevo sempre un evento: >>> >>> Ho provato con i router wr1043nd v2 e v4, wdr4300, xiaomi e wdr3600 >>> >>> Thu Aug 31 12:16:52 2017 daemon.info olsrd[1637]: detected duplicate >>> packet with seqnr 0x66c0 from 172.31.90.91 on eth0.4 (292 Bytes) >>> Thu Aug 31 12:16:54 2017 daemon.info olsrd[1637]: detected duplicate >>> packet with seqnr 0x66c1 from 172.31.90.91 on eth0.4 (444 Bytes) >>> >>> Questo evento esce fuori solo quando sono 2 stazioni e un ap ancora non >>> ho mai provato con più stazioni. >>> >>> può essere causato da una versione di firmware delle nanostation m5? >>> >>> >>> >>> _______________________________________________ >>> Wireless mailing list >>> Wireless@ml.ninux.org >>> http://ml.ninux.org/mailman/listinfo/wireless >>> >>> >> _______________________________________________ >> Wireless mailing list >> Wireless@ml.ninux.org >> http://ml.ninux.org/mailman/listinfo/wireless >> >> >
_______________________________________________ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless