There are 380mw radio’s, I’d like to stick a 15db omni on one and see what it does.

 

Kurt Fankhauser

WAVELINC

114 S. Walnut St.

Bucyrus, OH 44820

419-562-6405

www.wavelinc.com

 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marlon K. Schafer (509) 982-2181
Sent:
Monday, January 23, 2006 3:17 PM
To: WISPA General List
Subject: Re: [WISPA] soldering radio's

 

Making that modification would likely take the radios out of certification.....

 

Marlon
(509) 982-2181                                   Equipment sales
(408) 907-6910 (Vonage)                    Consulting services
42846865 (icq)                                    And I run my own wisp!
64.146.146.12 (net meeting)
www.odessaoffice.com/wireless
www.odessaoffice.com/marlon/cam

 


 

----- Original Message -----

Sent: Monday, January 23, 2006 6:05 PM

Subject: [WISPA] soldering radio's

 

Anyone here have experience soldering connectors on to Motorola Canopy radio’s? I’d like to start doing my own soldering and can’t figure out where to solder the center conductor and grounds for these. There are 3 points where the integrated antenna attaches to the PCB and I’m pretty sure that the top solder point is the center conductor but I don’t know if the other two are for the ground or what.

 

Kurt Fankhauser

WAVELINC

114 S. Walnut St.

Bucyrus, OH 44820

419-562-6405

www.wavelinc.com

 


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to