And that setup is 6db over max power......
JohnnyO wrote:
Ross - about a year ago I put a 12dBi Omni on the top of my bronco
with a 1watt Teletronics AMP behind it...... I was able to achieve
FULL coverage for about 1.5miles around the tower through trees,
houses, buildings, anything.
I would try it with a 12dBi Omni on his grain elevator without an
AMP and then if needed. AMP his tractor side of the link.
Hope this helps out. You can order the Teletronics AMPs/Cables etc
from Roger Peters - [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]> - 210-601-7727
JohnnyOOn Sat, 2006-02-04 at 09:32 -0600, Ross Cornett wrote:
Hey guys,
I have a farmer that wants farm coverage with little or no trouble.
He wants to browse from his tractor while the satelite guides his
tractor for him. I am putting out 2.4 from his Elevator leg, and I
believe with an omni he can get signal, is there a better way to do
this?
Please any ideas would be appreciated.
Ross Cornett
VP
217 342 6201 ex 7
HofNet Communications, Inc.
www.HofNet-Communications.com <http://www.HofNet-Communications.com>
HofNet-Communications.com
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
