Something I have discovered is that using a b/g ap in b mode will often increase performance.

The g radios have better receive sensitivity.

John J. Thomas wrote:

b tends to be more reliable than g, especially when penetrating walls.

JT


-----Original Message-----
From: Paul Hendry [mailto:[EMAIL PROTECTED]
Sent: Wednesday, February 15, 2006 02:33 PM
To: ''WISPA General List''
Subject: RE: [WISPA] Motel setup

I notice this kit is 11b only. Is there a specific reason for using 11b for
hotspots instead of 11g? I'm guessing it's because of the greater output
power and receive sensitivity of 11b but isn't OFDM better for bouncing
around the walls of a Hotel?

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Kurt Fankhauser
Sent: 15 February 2006 06:36
To: 'WISPA General List'
Subject: RE: [WISPA] Motel setup

Get about 3 of these things and you should be fine.
http://tranzeo.com/uploaded_images/117_10_5_TR-600f%20Series.pdf

Put ceiling omni's on them I would put one in the center of the
building, and the remaining two towards the ends of the building.



Kurt Fankhauser
WAVELINC
114 S. Walnut St.
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com


-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Jason Hensley
Sent: Tuesday, February 14, 2006 4:59 PM
To: WISPA General List
Subject: [WISPA] Motel setup

What's the currently recommended gear / setup for a motel?  Total of 113
rooms spread over 2 floors.  Going to be a 2-phrase project where the
first
group of rooms will have both Ethernet and Wi-Fi accessibility, with the
remaining to have WiFi only.  No idea yet on the layout of which rooms
will
be Ethernet / WiFi, but that's not really important.  Owner is running
the
Ethernet cabling himself - just looking to contract out the Wireless end
of
it.

I don't know much more than this at the moment.  Not sure on square
footage
or anything - that is to come soon, but thought I'd get some ideas on
equipment to start and then go from there.

Thanks a bunch!

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.15.7/259 - Release Date:
2/13/2006


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.15.8/260 - Release Date: 14/02/2006


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.15.8/260 - Release Date: 14/02/2006


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to