Not sure about the logo, my guess is, no. Has
to be the whole wispa logo, not just part of it.
I know Bob (if it's the same Bob Smith), he's a
----- Original Message -----
Sent: Thursday, February 16, 2006 11:18
Subject: [WISPA] Use of WISPA logo
Are we all able to use the WISPA logo like this ? http://www.kywifi.com/images/vptower/CIMG5548.jpg
- came across this post on tower talk , figured we all may be able to learn a
little bit about house cleaning from this.
Who is Bob Smith
*Bob Smith Wrote*
wireless network consultant in my 'other life' and thought you
all might get
a real charge out of seeing what some
people call a 'commercial tower install'
The tower in the
pictures is used by a TV translator system , but a new WISP
is thinking of putting up a system on the tower also.
experiencing a whole lot of electrical noise when he mounts his
on the tower, but he can hold them in his hand, not
mounted, and the noise
goes away. So now he's thinking of
wrapping the mounts with electrical tape to
insulate them from the
tower and install his equipment. (Good
My comment to him was "tie a cable to his bumper
and to the tower and
drive away from the tower, this way he would
be doing both the tower owner and
himself a favor". No
kidding aside, as you can see in the pictures
the tower is a mess.
ham's get hassled in California for a 30' tower, and in Ky. you can
put of anything, anyway and use it ,, Go
ARRL Life Member
Bragg, California 95437
"On The Air-Conditioned
Mendocino Coast, In REAL Northern California"
No trees were
destroyed in the sending of this message.
However, a large number
of electrons were terribly inconvenienced.
WISPA Wireless List:
WISPA Wireless List: email@example.com