That was pretty much my thought.  I can do a good job on the crimps (as long as I don't have a broken crimper, sigh). 
 
The problem is doing the crimps when it's 10* with a 20mph breeze blowing.  That's when it gets really hard to keep those wires in the right order while you try to push them into the crimp.
 
laters,
Marlon
(509) 982-2181                                   Equipment sales
(408) 907-6910 (Vonage)                    Consulting services
42846865 (icq)                                    And I run my own wisp!
64.146.146.12 (net meeting)
www.odessaoffice.com/wireless
www.odessaoffice.com/marlon/cam
 

 
----- Original Message -----
From: JohnnyO
Sent: Wednesday, February 22, 2006 2:25 PM
Subject: Re: [WISPA] ot rj45 crimpers

I'm the one who turned Rick and many others onto these Marlon - We've been using them for almost 3yrs. We have had 1 truck roll due to a bad crimp in this amount of time. Yes they are expensive if you look at it on a per crimp basis - but what is $1.10 per install worth to you in time / frustration / a professional crimp ?

I buy these in bulk in lots of 10,000 at a time. If anyone wants to purchase some ends for these I can prob save you $15.00 per 300pack and $10.00 on the tool.

JohnnyO

On Wed, 2006-02-22 at 12:22 -0500, Rick Smith wrote:
they're EZ RJ45 crimpers / ends.  and yeah, they're around 50 - 70 cents PER CONNECTOR.

BUT I'll tell you what....since I bought them, I've NEVER remade a cable, NOR have I
had to use a cable tester...

I won't go back now... actually feel helpless to borrow someone else's crimpers / ends


Marlon K. Schafer (509) 982-2181 wrote:
> That's it.  Thanks!
> 
> Do you really pay $.60 per connector???  Maybe it's not as nice of a 
> tool as I thought....
> 
> laters,
> Marlon
> (509) 982-2181                                   Equipment sales
> (408) 907-6910 (Vonage)                    Consulting services
> 42846865 (icq)                                    And I run my own wisp!
> 64.146.146.12 (net meeting)
> www.odessaoffice.com/wireless
> www.odessaoffice.com/marlon/cam
> 
> 
> 
> ----- Original Message ----- From: "Aubrey Wells" <[EMAIL PROTECTED]>
> To: "WISPA General List" <wireless@wispa.org>
> Sent: Wednesday, February 22, 2006 9:14 AM
> Subject: Re: [WISPA] ot rj45 crimpers
> 
> 
>> http://www.happcontrols.com/electrical_supplies/92060900.htm
>>
>> ---
>> Aubrey Wells
>> One Ring Networks
>> [EMAIL PROTECTED]
>> o: (404) 601.1407
>> f: (404) 601.1408
>> c: (770) 356.9767
>>
>>
>>
>> Marlon K. Schafer (509) 982-2181 wrote:
>>> Hi All,
>>>
>>> I'm looking for a crimper I saw someone talk about.  It uses special 
>>> rj45 connectors that allow the cable to go through the end.  Then the 
>>> crimper crimps and cuts to length at the same time.
>>>
>>> Anyone know what it's called and where to get the connectors and the 
>>> crimper?
>>>
>>> thanks!
>>>
>>> Marlon
>>> (509) 982-2181                                   Equipment sales
>>> (408) 907-6910 (Vonage)                    Consulting services
>>> 42846865 (icq)                                    And I run my own wisp!
>>> 64.146.146.12 (net meeting)
>>> www.odessaoffice.com/wireless
>>> www.odessaoffice.com/marlon/cam
>>>
>>>
>>>
>> -- 
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>>
> 


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/
-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to