We use used m0n0wall for a large marina hotspot installed on a WRAP
board.  It worked ok, but its bridging capabilities are limited.  We
were using two wireless cards for the hotspot and one of the Ethernet
for basically a linksys in a common room and wanted to put them all
behind the captive portal.  A limitation of their interface would not
allow us to do this.

But with that said, it works really well and the interface and
monitoring is great.

Matt


-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of rabbtux rabbtux
Sent: Saturday, April 22, 2006 5:00 PM
To: wireless@wispa.org
Subject: [WISPA] Anyone used m0n0wall?

Anyone have any good/bad comments about using the m0n0wall
distribution on their access points.  I see it now offers a captive
portal with Radius authentication.

Thanks - marshall
-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to