The night hawk units , does this, exactly, it receives a page with a 4 digit
code to either turn off, or reset the ac outlet,  the good thing about the
nighthawks is that you can have as many units with the same capcode and pay
just for 1 paging number, each units has a code, that it uses to
differentiate from the others...

Gino A. Villarini
[EMAIL PROTECTED]
Aeronet Wireless Broadband Corp.
tel  787.273.4143   fax   787.273.4145

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Blake Bowers
Sent: Thursday, April 27, 2006 9:39 AM
To: WISPA General List
Subject: Re: [WISPA] FS: Remote Reboot

Are all you wanting to do is reset your equipment?
No bells and whistles, just page the pager causes
the equipment to reset?


----- Original Message ----- 
From: "Gino A. Villarini" <[EMAIL PROTECTED]>
To: "'WISPA General List'" <wireless@wispa.org>
Sent: Thursday, April 27, 2006 8:35 AM
Subject: RE: [WISPA] FS: Remote Reboot


> Well, the problem is not pocsag or flex ( my last business was paging),
> historically here in Puerto Rico, numeric paging didn't catch.. PR market
> was always alphanumeric ( we had a big message center, with lots of
> operators...what a headache!!!)so, the problem lies in the remaining 
> paging
> operator is using a Glenayre paging system hooked up to the call attendant
> system ( he has expanded into a calling center) so all the messages that 
> are
> transmitted over the paging system (even numeric ones) have time and date
> stamp, before the message... and this basically kills the nighthawk coding
>
> Gino A. Villarini
> [EMAIL PROTECTED]
> Aeronet Wireless Broadband Corp.
> tel  787.273.4143   fax   787.273.4145
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf Of Blake Bowers
> Sent: Thursday, April 27, 2006 9:24 AM
> To: WISPA General List
> Subject: Re: [WISPA] FS: Remote Reboot
>
> The issue must be a format issue.  It appears that the Nighthawk
> system uses Pocsag, long the leader in paging formats.
>
> Some paging systems do not use Pocsag (Very few do not have
> the capabilty to use Pocsag, but there are some out there)
> and the Nighthawk would not appear to be compatable with
> a pure FLEX, two tone, or other format system.
>
> It would not take much to take a flex pager (Or whatever format
> that system uses) and have it trip a relay though, which could reset
> your system.  Tie a transistor to the LED, have it switch a relay.
>
> You could do that with any format, all you would need is a pager
> from the system, and a little thought.  Not as pretty as the nighthawk,
> but I bet it would work just as well.
>
>
> ----- Original Message ----- 
> From: "Gino A. Villarini" <[EMAIL PROTECTED]>
> To: "'WISPA General List'" <wireless@wispa.org>
> Sent: Thursday, April 27, 2006 7:34 AM
> Subject: RE: [WISPA] FS: Remote Reboot
>
>
>> Zip code? Huh, you just need a paging company with coverage in the area
>> you
>> need service with.. We ordered our units without the paging service, go 
>> to
>> you local paging company and activate the units with them
>>
>>
>>
>> Gino A. Villarini
>> [EMAIL PROTECTED]
>> Aeronet Wireless Broadband Corp.
>> tel  787.273.4143   fax   787.273.4145
>>
>>  _____
>>
>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
>> Behalf Of Tom DeReggi
>> Sent: Thursday, April 27, 2006 3:43 AM
>> To: WISPA General List
>> Subject: Re: [WISPA] FS: Remote Reboot
>>
>>
>>
>> Aren't those preprogramed from the factory for specific ZIP CODEs of
>> operation.
>>
>> Thats the reason we didn't go with them, we couldn't just buy a bunch of
>> them and use them, we had to predict in advance where we would use them.
>>
>>
>>
>> Tom DeReggi
>> RapidDSL & Wireless, Inc
>> IntAirNet- Fixed Wireless Broadband
>
>
> -- 
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
> -- 
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
> 


-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to