Dan's got some. I'm awaiting 6, but I hear I won't be getting them till Mid-June.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of rabbtux rabbtux Sent: Thursday, May 18, 2006 11:09 PM To: WISPA General List Subject: Re: [WISPA] SR9 performance Did you folks finally get some SR9s to test? How are your initial results???? On 5/18/06, Rick Smith <[EMAIL PROTECTED]> wrote: > > > Someone mentioned that in their testing TX was in a 10 mhz channel and > RX was 5 MHZ (or however you set) > > Either way, it wasn't setting it for the same width baed on what you > pick - i.e. it was 5/10 10/10 and 20/10mhz respectively. > > > > > ________________________________ > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of chris cooper > Sent: Thursday, May 18, 2006 2:02 PM > To: [EMAIL PROTECTED]; 'WISPA General List' > Subject: RE: [WISPA] RouterBoard 112s > > > > > > Does anyone know how much of the band you take up as you raise the raw > data rate on the SR9s? Ie, if I use 5 Mhz, what is the data rate, 10Mhz? > > > > Chris Cooper > > Intelliwave > > > > I will be trying them as soon as the SR9 cards arrive...... > > > > > > > > -- > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > -- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
