I can't fit larger than a 2ft solid dish because of wind load, but need
more gain. I would expect a 4ft grid to have similar gain to a 3ft solid.
-Matt
Tom DeReggi wrote:
There are large 4ft and 6ft grid antennas on some of the towers that
we colocate on also. But they are all for licensed frequency. I
pulled the model numbers off them, and called the manufacturer, and
they did not make 5.8Ghz versions.
However, I'd argue, why would you need 5.8Ghz grids apposed to smaller
solid parabolics of same power? Sure windload, but if up on a tower
where you care about windload, you'd also most likely care about the
better front to back isolation that a Solid dish provided.
What's your application?
Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband
----- Original Message ----- From: "Matt Liotta" <[EMAIL PROTECTED]>
To: "WISPA General List" <[email protected]>
Sent: Friday, May 19, 2006 8:23 AM
Subject: Re: [WISPA] 4ft 5.8Ghz dual polarized grid
Those are dishes; not grids.
-Matt
[EMAIL PROTECTED] wrote:
I just ordered 7 4' Dual Pol Andrews dishes. They are rated at 34.9
db.
Rick Harnish
President
Supernova Technologies, Inc.
260-827-2482 Office
[EMAIL PROTECTED]
Founding Member of WISPA
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Matt Liotta
Sent: Thursday, May 18, 2006 6:10 PM
To: [EMAIL PROTECTED]; WISPA General List
Subject: Re: [WISPA] 4ft 5.8Ghz dual polarized grid
32-34dbi
-Matt
Blair Davis wrote:
What kind of gain is that gonna have?
Say maybe 40db?
Matt Liotta wrote:
Anyone know where to find such a thing?
-Matt
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
