Title: Message
Actual output on the SR5s I tested with were about
20-21dB. I do not have any SR5s in a production environment at this time,
only the CM9. Most of my ptp links are actually Link10; but we have
started to do more testing of MT links for low volume repeaters.
Mike
----- Original Message -----
Sent: Thursday, May 25, 2006 12:42
PM
Subject: RE: [WISPA] SR5s and 36miles -
INPUT NEEDED
Mike
- what is the actual output of the SR5s you are seeing ? Or anyone else have
exact figures - Should I be running my calculations using 21dbm or 26dbm as
advertised ?
JohnnyO
It may be difficult to provide a mission
critical link with 2-footers; but then again I am using CM-9's on a
17-mile link. I know this doesn't help you; but I just recently
replaced my PacWireless 2ft dishes with 2ft dual-polarity Radiowaves dishes
and gained 4dB on both ends. Signal level is around
-62dB.
Mike
----- Original Message -----
Sent: Thursday, May 25, 2006 9:24
AM
Subject: [WISPA] SR5s and 36miles -
INPUT NEEDED
I've run the path calcs with Radio Mobile and I
should see low -70s using the SR5s in Mikrotik and 2ft dishes at
36miles.
My question is - how many people out there have
links 35+ miles with SR5s / Mikrotik and 2ft Panels or dishes ? I have a
link I need to have up as mission critical for a company prior to Saturday
and all I have on-hand is 2ft PacWireless Dishes
.
Regards,
JohnnyO
-- WISPA Wireless List:
wireless@wispa.org
Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless
Archives:
http://lists.wispa.org/pipermail/wireless/
-- WISPA Wireless List:
wireless@wispa.org
Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless
Archives:
http://lists.wispa.org/pipermail/wireless/
|
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/