At 02:36 AM 6/8/2006, you wrote:
MessageA few months ago, someone said this can be done, but for the
life of me, I can't figure it out.
Mikrotik channels are not aligned with Trango channels, and I want
to slide/change my Mikrotik channel center points by 10 mhz so it
matches my Trangos at the cell.
I am not sure if we will have that in the 2.9 version -- but it is
already in the 2.10 beta (not released yet). At the MUM meeting in
Dallas, a number of people asked for that. For the powerchannel
5/10MHz channel size, I believe you can set the center channel in
5MHz increments.
Here is a link to some pics from the MUM -- we had 140 participants!
http://mum.mikrotik.com/?go=usa
more pics
http://mum.mikrotik.com/album2/
Also, we just released the Dude (full release) and the beta of the Dude2.
http://www.mikrotik.com/thedude.php
John
www.mikrotik.com
For example, now Mikrotik link is set at 5765. I'd like to have it
set at 5755. (but 5755 not a choice in the channel selection box)
Because I have Trango channel 1 (5736) and Channel 3 (5776) in use,
and do not want 20 mhz channels to overlap with Mikrotik..
I do however see in the manual that wireless info command can report
channels in 5 mhz increments.
How do I set available channels to the 5 mhz increments, in MIkrotik?
(I usually use Winbox for management)
Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
