What are you willing to pay and what are your support requirements?

   Sam Tetherow
   Sandhills Wireless

Matt Liotta wrote:

I understand you are suggesting I wouldn't have to psychically build the devices, but that isn't what I am worried about. I want an off-the-shelf product that is supported by a vendor. That includes it being pre-built, software installed, and support available.

-Matt

Sam Tetherow wrote:

If you order it all from wisp-router they will assemble it for your so you would get a die-cast case with the RB mounted the radios and pigtails installed. All you would need to do is set up the software end of things, which could be done with a script once you have the initial setup done. One thing to note, I have not ordered 5Ghz pigtails from wisp-router in quite sometime, but the last time I did order them, their quality was questionable.

I would bet if you went the WRAP/StarOS route wisp-router would do the same. No idea on other vendors or the WAR boards as I have never ordered them.

   Sam Tetherow
   Sandhills Wireless

Matt Liotta wrote:

I am looking for a device I can buy that does all of this out of the box. I don't want to build my own since I need 30-40 of them in the next 30 days.

-Matt

Sam Tetherow wrote:

Mikrotik on a routerboard 532 should do the trick although I haven't messed with the VLAN stuff. I am not a StarOS user, but I would bet that a StarOS setup on either a WRAP or WAR board would work
as well.

   Sam Tetherow
   Sandhills Wireless

Matt Liotta wrote:

I am looking for a device with the following requirements:

* Can backhaul at >11Mbps operating in the 5.2Ghz band
* Can support VLANs
* Can assign a VLAN to one Ethernet port
* Powered by PoE (the standard is not required)
* Can act as a 2.4Ghz Wi-Fi access point assigned to a different VLAN than the Ethernet port
* Everything in a single outdoor enclosure

Any ideas?

-Matt










--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to