If you're NAT'ing it will cause this - Netmeeting has issues like this too.
Public IP as others have suggested will probably solve it.
----- Original Message -----
From: "George Rogato" <[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Wednesday, July 12, 2006 12:45 PM
Subject: Re: [WISPA] AIM Video issues
I would put a public on my laptop and see if it works elsewhere on my
network and work backwards from there. Not sure about your policy of
privates and publics, but it would be good to find out the reason.
George
Scott Reed wrote:
Yes, but none that we know would impact it.
The public IP is a possibility as well.
Scott Reed
Owner
NewWays
Wireless Networking
Network Design, Installation and Administration
www.nwwnet.net <http://www.nwwnet.net/>
*---------- Original Message -----------*
From: George Rogato <[EMAIL PROTECTED]>
To: WISPA General List <wireless@wispa.org>
Sent: Wed, 12 Jul 2006 10:30:08 -0700
Subject: Re: [WISPA] AIM Video issues
> Also are you blocking any ports?
>
> --
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
*------- End of Original Message -------*
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
