I have almost no clue. We've had little time to play with them and I have no
frame of reference. We've never used 900MHz before. The throughput is full
802.11 at links in the high eighties. There doesn't appear to be much
foliage penetration as close as a mile. At an eighth mile, we can get a
solid neg 82 through solid jungle with wide beam antennas. We're going to
have to find narrower beam antennas that don't weigh four hundred pounds
before we can figure out much more. 900 roos are coming out soon but I have
no idea how tight the broadcast is. I've also seen five foot yagis that
might penetrate mountains. - cw
George Rogato wrote:
When you say limited success, can you give examples?
I'm about to buy some and would like to know what kinds of issues pop up.
Currently I'm using Trango 900 and RF Linx 900 UDC's and know the
limitations of those radios, wondering how they compare to SR9's
penetration wise.
George
cw wrote:
I didn't know a WRAP board would power a 700mW radio. We've had
limited success with SR9s on WAR boards using 66 and 180 degree sector
panels from Superpass. Does anyone know of any narrower beamwidth
sector panels that don't weigh fifty pound or measure five feet in at
least one direction? - cw
Lonnie Nunweiler wrote:
Whoa, bad assumption Rick. We would never be waiting for anything
from Tranzeo.
I was saying we are awaiting our first batch of SR9 for evaluation and
our own network, but that many of our customers have already tested
SR9's with our software, and they report excellent results with both
the WAR board and the new V3 code for WRAP boards.
The Tranzeo should talk with an SR9 since they both use an Atheros
base. The only trouble will be the driver and that I can't speak to.
Lonnie
On 8/3/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
Lonnie,
To clarify please, I assume your saying that you are awaiting your
first
shipment of Tranzeo 900's for your own use....but others have already
deployed WAR Boards V3 or WRAPs with the Tranzeo 900 solution. Is that
correct?
-----Original Message-----
We are awaiting our own shipment but customers have reported good
results with WAR boards and the new V3 for x86 WRAP boards.
Lonnie
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
