I meant for this to go to Part15 and Wispa lists, Maybe this will work.
A special thanks goes to Jeremy Davis, Jeremy was on the phone and looking at the Mikrotik all the while, most of the cudoos go to Jeremy. below I make it sound like I did it. NOT TRUE, I'm the guy with the thick skull in this mix. JEREMY DAVIS - GETS ALL THE CREDIT!!!!!!!!!!!!!! -----Original Message----- Thank You all for your input, I will make a troubleshooting guide with this and some other responses I have kept. Since you all responded so generously. Its working, not "fixed". The culprit is a Canopy 2.45 Advantage AP, with no customers registered. It just doesn't seem to work all the time. So I redirected those users to my 900 canopy system. There are no SM's to be registered. about 4 days ago I restarted the AP and thought I'll try again with a new install for this friday. never thought about the AP being the problem. So, when I got to the Headend, I thought, lets just see which sector is producing the problem and then I can at lest provide service to my other users. So, I unplugged all AP's, left them off for 5 minutes, then added them back to the router one at a time, sector 3 was the bug, I just unplugged the AP. I didn't have to work nearly as hard as you all recommended, I was lucky, very lucky. But now I am going to download Ethereal "WireShark" and learn how to use it, Thanks again for all your insights and advice. You guys are Great!!!!!!!!!!!!! Here are most of the guys that responded: TJ Stamm, Justin Wilson, Graham McIntire, Tim Kerns, [EMAIL PROTECTED], Mac Dearman, Rich Comroe, Bryan Scott, David Sovereen, Adam Moffett, Christopher Tyler, "Chuck" <[EMAIL PROTECTED]>, Cameron Earnshaw, Tim Kerns, William.L. Edwards, Graham McIntire, Mark Martin, Bill Prince, David Milholen, Ira Hughes, Adam Moffett If I missed anyone I apologize for my oversite. Ron Wallace |
-- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
