Do you find that a surge supressor at the CPE is better then at the internal PC/Router/Switch? Or do
you use one at each end?

Jeromie


Harold Bledsoe wrote:

I can answer some of these...

It looks like a Zinwell B191 RTL8181 with a Citel indoor surge
protector.

-Hal

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Jeromie Reeves
Sent: Saturday, August 26, 2006 9:24 PM
To: WISPA General List
Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik

Looks good. What radio are you using with what looks to be a Realtek SoC? Is that
a PoE splitter, a surge supressor, or both? How long is that RF pigtail?

Jeromie

Brian Rohrbacher wrote:

I take a self tapper and run it out the bottom of my metal box, attach

a #12 piggy tail, and attach the other end through a hole on the board. Kind of like the attached pic. Should work, eh?

Brian

Harold Bledsoe wrote:

One word to the wise on these: many PCBs are grounded through the screw holes. If you are using plastic standoffs, you may want to consider grounding the board some other way...

-Hal

--------------------------------------
Harold Bledsoe
Deliberant Wireless
http://www.deliberant.com

________________________________

From: [EMAIL PROTECTED] on behalf of Mark Nash
Sent: Fri 8/25/2006 1:04 PM
To: WISPA General List
Subject: Re: [WISPA] Self Adhesive Mini PCB supports for Mikrotik



I'll take some... Catch me offlist.

Mark
-----Original Message-----
From: Brian Rohrbacher <[EMAIL PROTECTED]>
Date: Fri, 25 Aug 2006 11:21:57
To:Conversations over a new WISP Trade Organization <wireless@wispa.org>, [EMAIL PROTECTED]
Subject: [WISPA] Self Adhesive Mini PCB supports for Mikrotik


https://secure.microplastics.com/detail.asp?part=minilockpcbsupport&fam=
cbhardware
They have them in stock now.  I remember there was some talk about
these
a while ago.
$50 min order so I just got 400 or so of the self adhesive PCB
supports.
I got the 5/8 standoff (should be able to fit the cards under the board too)

I don't need 400, so if anyone wants a few, let me know.

Otherwise, just letting ya'll know they are in stock.

www.microplastics.com
--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/




------------------------------------------------------------------------


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to