I found a great pdf file on Belden's site showing how to make shielded ends. We use them on all of our AP's. Some CPE installs require shielded also. Like a 900 Canopy recently sharing space with a ham radio in the 145MHz range.
They have a Cable 101 section somewhere. Mike -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Koskenmaki Sent: Wednesday, August 30, 2006 10:49 PM To: [EMAIL PROTECTED]; WISPA General List Subject: SPAM-LOW: [WISPA] Sheilded / grounded CAT5 I'm interested in finding out how to make best use of shielded CAT5. Where do I find connectors with the shielding, instructions for these things, etc? I'm going to be working near some high RF spots and think that shielded CAT5 would be good to use. Thanks Mark +++++++++++++++++++++++++++++++ neofast.net - fast internet for North East Oregon and South East Washington email me at mark at neofast dot net 541-969-8200 Direct commercial inquiries to purchasing at neofast dot net -- WISPA Wireless List: email@example.com Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.11.7/433 - Release Date: 8/30/2006 -- WISPA Wireless List: firstname.lastname@example.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/