Take note there could be some advantage in using the radio which fully utilizes the lowest part of the band. The farther one can stay away from 930 as possible (paging guys), is a good thing. Trango uses full 6Mhz to maximize full use of band, but if limited to only 5 Mhz, I'd throw away the end portion first.

Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband


----- Original Message ----- From: "Mark Nash - Lists" <[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Friday, September 29, 2006 2:27 AM
Subject: [WISPA] Mikrotik AP/Ubiquiti SR9 & Tranzeo CPE 900 MHz


Can't get an association from the Tranzeo 900 MHz CPE to the Mikrotik RB532 with the SR9 card.

I can associate with the Tranzeo 900 MHz AP immediately.

The only thing that I see that could be causing the problem is the channel table is off.

The Ubiquiti card has this:

922 MHz
917 MHz
912 MHz
907 MHz

The Tranzeo AP shows this:

923 MHz
918 MHz
913 MHz
908 MHz

I've got them both set to 5 MHz channel widths.

I've looked for a couple hours now and I can't see where to change the frequency tables on either product (like you can on the Trango).

Has anyone gotten this scenario to work?

Mark Nash
Network Engineer
UnwiredOnline.Net
350 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-5555
541-998-5599 fax


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.12.8/455 - Release Date: 9/22/2006



--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to