Put in bulkhead type n-f gender benders. I use them all of the time. No
changing the weather sealing. Ever.
Just have to use n-m piggys instead of bulkhead ones.
Marlon
(509) 982-2181 Equipment sales
(408) 907-6910 (Vonage) Consulting services
42846865 (icq) And I run my own wisp!
64.146.146.12 (net meeting)
www.odessaoffice.com/wireless
www.odessaoffice.com/marlon/cam
----- Original Message -----
From: "Brian Rohrbacher" <[EMAIL PROTECTED]>
To: "WISPA General List" <[email protected]>
Sent: Friday, October 06, 2006 10:46 AM
Subject: Re: [WISPA] lmr 400 splitter
Either I am a bad explainer or there are some bad readers here.
Lets start again. Lately I have had issues because WiFi sucks (wish I
could afford proprietary) moving on.....I have been using different radio
cards and have ended up having to switch the pigtails from u.fl to mmcx or
visa versa. It sucks to cut away mastic and reseal these n female
connectors on the bottom of my enclosure. I would like to leave two
pigtails attached to my lmr400 n male antenna cable. Then inside the
enclosure I could grab whatever pigtail I want to use with the "next
greatest card" that I hope will fix everything.
Probably what I should find is a u.fl to mmcx adapter and a mmcx to u.fl
adapter so I can adapt. Expanding from that, is there any such "WISP
emergency include all cable adapter kit" that exists?
Brian
Marlon K. Schafer (509) 982-2181 wrote:
I've been told to never do this. The output of the transmitting radio
will totally deafen the receiving one. It might work for just a few
customers at a time (or with something that would sinc like the Moto
products) but I think that much usage on the network would kill it pretty
fast.
I've used splitters for two antennas per radio, that seems to work ok.
Marlon
(509) 982-2181 Equipment sales
(408) 907-6910 (Vonage) Consulting services
42846865 (icq) And I run my own wisp!
64.146.146.12 (net meeting)
www.odessaoffice.com/wireless
www.odessaoffice.com/marlon/cam
----- Original Message ----- From: "Brian Rohrbacher"
<[EMAIL PROTECTED]>
To: "Conversations over a new WISP Trade Organization"
<[email protected]>
Sent: Thursday, October 05, 2006 12:47 PM
Subject: [WISPA] lmr 400 splitter
I want to go from two cards to one antenna (wouldn't both be on at same
time).. I guess I want a y, to go from 2 n male to 1 n female.
Brian
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
