Ok, found it in the CLI. I'll give that a try tomorrow and see if we can keep this link passing data.
We can't easily use the BreezeConfig as these radios are located in such a way that Telnet is the best method to manage them. I really wasn't impressed with the BreezeConfig GUI anyway...seemed very slow to respond. Thanks again for your input. Best, Brad -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David E. Smith Sent: Tuesday, October 10, 2006 11:42 PM To: WISPA General List Subject: Re: [WISPA] Are these good or bad Alvarion VL statistics... Brad Belton wrote: > Is there a way to lock in a modulation rate at the lowest setting...say > maybe 6MB in an effort to give the VL a chance in a noisy environment? There is, but I don't remember how to do it from the command line :( With Breezeconfig, click on the "Performance" tab, set Maximum Modulation Level to whatever, click Apply. Then switch back to the Unit Control tab and click "Reset" to reboot the SU. BreezeConfig also gives you all sorts of nifty performance statistics under the Site Survey tab to help you find out just what ails your radio. The "Per Mod Level Counters" sub-tab is especially fun in that regard. David Smith MVN.net -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
