I heard Eje telling folks at ISPCON that the chip that selects the antenna port for diversity on that module (I believe) was VERY sensitive to static discharge. Someone mentioned seeing about 20 db of attenuation when it fries. It sounds like you may have seen this first hand? Eje, if you are here can you confirm that this is the same module you said was quite susceptible to this damage? How did you say you have protected against this damage? I am sure it is surge / lightning protection but I think you mentioned a particular product that had given you good protection from this failure issue with these modules and was very cost effective. I assume Eje is on here?
Scriv

Have you tried replacing the SR2,
we had just replaced two, we were getting -80s on a small backhaul, MT to
MT, and after we swapped the radio, we were back at -60 .. Why, got me!
Dennis Burgess, MCP, CCNA, A+, N+, Mikrotik Certified
[EMAIL PROTECTED]
www.2kwireless.com

2K Wireless provides high-speed internet access, along with network
consulting for WISPs, and business's with a focus on TCP/IP networking,
security, and Mikrotik routers.

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Brian Rohrbacher
Sent: Wednesday, November 15, 2006 10:05 PM
To: WISPA General List
Subject: Re: [WISPA] star os/sr2----mikrotik/cm9

When I use sr2 my ack timing is all over the place, like 300 and the links are crap. I drop in a cm9 and all the ack's fall to 30's where they should be. This is all on MT.

Brian

Blair Davis wrote:

The cm9 is rated for 17db

The sr2 is rated for about 26db....

we are happy with the sr2, sr5 and sr9.   all deployed and work well....

Brian Rohrbacher wrote:

I replaced a star os/sr2 with a mikrotik/cm9 setup on an omni. I thought it would help my noise issues to get rid of the amped up sr2. It may have helped a little but now I have signal that I think it quite a bit less at the clients. What level of power is the cm9 at by default in a mikrotik and if I switch it to manual what could I push it to?

Brian

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to