Be careful, I ran 8.1.4 on one tower for a week with no issues. I then proceeded to run it on 6 more towers for 2 weeks, no problems. But when I did the last 8 towers we had our highest number of tech calls since our mail server crashed. SM Ethernet ports would just lock up (RF interface was still accessible), customers with no problems started forming thousands of session per day. Just a real bad deal, mind you it did fix some problems, but it wasn't worth it so we rolled back to 7.3.6. That was another headache. A little birdie told me to NOT run 8.1.4 or 8.1.5 and wait for 8.1.6..... Take it as you choose.
Mike Bushard, Jr Wisper Wireless Solutions, LLC 320-256-WISP (9477) 320-256-9478 Fax -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Liotta Sent: Saturday, December 09, 2006 8:31 AM To: WISPA General List Subject: [WISPA] Canopy 8.1 firmware For those of you running Canopy, we recently upgraded some of radios to the latest firmware. We did this because of the continuing Ethernet problems we were having with them. I am happy to report the new firm does indeed fix the Ethernet negotiation issues mentioned in the release notes. We have been happy with the radios we have upgraded thus far and we are now planning an upgrade cycle for our entire network. -Matt -- WISPA Wireless List: email@example.com Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: firstname.lastname@example.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/