If reliability is your main issue then you may reconsider using wifi product and omni antennas. There are so many things that can effect the radio signal. If you link to experiment then perhaps it's good to go with WAR boards as it's kind of a make it yourself solution. If you want something that just goes in and is secure and works then be prepared to spend more money. So first you need to know what you are looking for and how much money you have to spend. Marlon's idea with the Tranzeo operating in WDS is good for low cost without having to make it yourself. But you still need someplace in the middle that you can put a radio. If you don't have that then it's time to look at different ways to do this. Too many questions and not enough answers yet.


Carlos A. Garcia G wrote:

reliability its the primary concern and the speed of the link its enough starting with 11Mbps

Marlon K. Schafer (509) 982-2181 escribió:

Hi Carlos

You don't tell us what speed and/or reliability you need for that link.

I tried the single radio repeater idea you are talking about. The results pretty well sucked. big time.

However, I'm about to try it again with a protocol called wds. That's supposed to allow an ap work as both an ap and a client radio at the same time. It's supposed to do what you are asking. I'm sure that there will be a speed penalty though, hopefully just much less than it was last time I tried this.

You'd end up with  ap/noc<-->ap/wds<-->cpe/office

We've got a person that we're about to install, he is the ONLY one that sees another customer that's wanted service for years. I'm going ot use a Tranzeo AP with a Teletronics splitter and a pair of Maxrad antennas. The backhaul to the main tower will be done with vertical and the one to the remote site will be horizontal.

Having said all of that, you really should use 4 radios to do this. It'll be faster and more stable. Radios don't like to store and forward out one port. They like to rec. on one and tx on the other basically at the same time.

Wish us both luck!
(509) 982-2181                                   Equipment sales
(408) 907-6910 (Vonage)                    Consulting services
42846865 (icq)                                    And I run my own wisp! (net meeting)

----- Original Message ----- From: "Carlos A. Garcia G" <[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Monday, December 11, 2006 3:49 PM
Subject: [WISPA] Need opinion

Hi i have a problem i need to establish a wireless link betwen my ofice and another ofice there are a hill betwen so what equipment or vendors do i have to contact: look!

NOC <-->> POP <-->> OFFICE
WISPA Wireless List: wireless@wispa.org


Archives: http://lists.wispa.org/pipermail/wireless/

Mike Brownson
Electro-comm Distributing
5015 Paris St
Denver, CO 80239
(303) 371-8182 x112,   (800) 525-0173

Your 24x7 support staff is at www.ShopECBIZ.com
Interested in Metro WiFi? We have solutions
Coming soon from Tranzeo, 900MHz PtMP
We are having our 13th annual EC Expo January 17-19, 2007 in Denver Colorado.  
There is 2 days of training from Canopy, Airaya, Bridgewave, Dragonwave, 
Tranzeo, Stratex, Inscape data, Trylon and Polyphaser.  The exhibits will be on 
Friday January 19th. Visit www.ec-expo.com for registration and information.

WISPA Wireless List: wireless@wispa.org


Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to