Hi,
    those of you who use Canopy 900: what is the actual throughput 
you've gotten to the CPE?  4Mbps or less?  Has anyone run a bandwidth 
test while passing traffic simultaneously in both directions (such as 
with Qcheck)?
    Thanks a lot.

>>>>>>>>>>>>>>>>>>>>>

If you have adequate SNR to be able to associate at the higher modulation
(2X), then you will get an aggregate of 4 Mb
Regarding up vs down, that depends on how you set your ratios in Canopy
(it's allocated on a percentage basis)

Qcheck is a horrible program for accurately checking bandwidth, I would
recommend you look into something that actually works like Iperf

-Charles

-------------------------------------------
WiNOG Wireless Roadshows
Coming to a City Near You
http://www.winog.com 



-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mario Pommier
Sent: Wednesday, January 03, 2007 2:36 PM
To: WISPA General List
Subject: [WISPA] Canopy actual throughput




Mario





-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


-- 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to