Recently, we decided to run VLANs off of one of the Mikrotik routers to provide better port density. Basically routed vlans to a Cisco 2950 switch (one VLAN per AP). To our disappointment, we found that this scenario yielded packet loss even pinging between a hardwired radio and the Mikrotik. We assumed that this bust be a bad cable or defective switch so we setup another in the lab with the same results.
Has anyone else used the Mikrotik with VLANs into a Cisco switch. To take it a step further, if you have time, try pinging a device with a flood ping at 20 ms from the MTIK or the ping ip command from your Cisco switch with about 5,000 36 packets and I suspect you’ll see the same thing. Any suggestions/ideas are appreciated as always :-) - Don -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.410 / Virus Database: 268.17.12/655 - Release Date: 1/28/2007 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/