We drill through the back metal case, and silicone really well.
Pac Wireless's site may have had a document suggesting a good way to
waterproof.
But my answer was to buy Teletronics, Acconet, or MTI panels, that have a
may to properly mount a backplane.
In msot cases I'd rather pay than cut corners.
(Pun of the day... "Cases" :-)
Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband
----- Original Message -----
From: "Mark Nash" <[EMAIL PROTECTED]>
To: "WISPA General List" <[email protected]>
Sent: Friday, February 16, 2007 4:14 PM
Subject: [WISPA] Mikrotik RB532A/Rootenna 5.8GHz Mounting
Anyone got a place to buy a mounting setup (plate, standoffs, etc) for a
Mikrotik RB532A going inside a 5.8GHz Rootenna (R2T58-24)? Are we just
putting tape-backed standoffs on these?
Thanks.
Mark Nash
Network Engineer
UnwiredOnline.Net
350 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-5555
541-998-5599 fax
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
