Good that is what I was hopeing to hear. Thanks Jack, _ /-\ ndrew
On 2/23/07, Jack Unger <[EMAIL PROTECTED]> wrote:
You're right to try it; that will provide the information that you need. Most likely, the losses will be fairly low. jack -----Original Message----- >From: Andrew Niemantsverdriet <[EMAIL PROTECTED]> >Sent: Feb 23, 2007 10:46 AM >To: wireless@wispa.org >Subject: [WISPA] Signal Propagation through Vinyl?? > >We are putting together a bid to serve some small kiosk type >buildings. The don't want the antenna on the outside of building. >Instead they would like to put the antenna under it's false roof. The >roof is made of fairly thin vinyl material. Has anybody had any >experience with what a 5.8Ghz signal will do through that? We have >setup a time to test next week but if it is not going to work I don't >even want to waste time writing up a proposal. The sites are all over >town so there will be some long shots that will not work if there is >much signal loss. >-- >WISPA Wireless List: wireless@wispa.org > >Subscribe/Unsubscribe: >http://lists.wispa.org/mailman/listinfo/wireless > >Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/