Hello Don, If you are running current firmware (v2.9.3x or greater) under the Simple Queue Advanced tab try changing the Queue Type to "Ethernet-default".
We have seen more accurate bandwidth limiting using the Ethernet-default setting. YMMV, but worth a try. Best, Brad -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Annas Sent: Thursday, March 22, 2007 8:16 AM To: 'WISPA General List' Subject: [WISPA] Mikrotik Simple Queues We are trying to use Simple Queues to rate limit some of our hardwired clients in the building and are having some problems with the faster connections. Using the routerboard 532, we are trying to limit a client to a 10mb x 10mb connection. Their is not much traffic on the box and the processor is low even in the midst of the speed test to an on-net server. The queue seems to work fine on the download and the client pulls about 9.79MB, however, on the upload, it caps out around 6.5MB. If we remove or disable the queue, the clients is able to do around 24MB symmetric. Are their any known issues with throughput when sending traffic through a queue? Should a 532 not be able to handle 10MB w/ the queue? Any tricks or settings that I may need to look at? Thanks. _________________________ Don Annas 336.510.3800 x111 336.510.3801 fax HYPERLINK "mailto:[EMAIL PROTECTED]"[EMAIL PROTECTED] HYPERLINK "http://www.triadtelecom.com/"www.TriadTelecom.com _________________________ -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 268.18.16/729 - Release Date: 3/21/2007 7:52 AM -- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
