Yep, still got both of them and yes there were the two I bought from you. I got an Imagestream Rebel in last week and am swapping it in tonight.

I'm sure the issue is driver related and I have tried various version of RouterOS from 2.9.23 through 2.9.42 and all of the will lock up if left running. It depends on load on the machine as well as time up. Which makes me think there is a memory leak somewhere in the driver code. The machines were put together using the the MB, RAM, NIC and CPUs you said you used in your router so I don't think it was that either.

Sam Tetherow
Sandhills Wireless

Brad Belton wrote:
Hello Sam,

Curious if both DS3 cards have the lockup problem?  You do still have two of
them, right? If so, it is unlikely you have two bad DS3 cards.  Especially
because if they are the ones you bought from me I know they are good!
<grin>

We never had any trouble with them interfacing our AT&T DS3s.  Sure sounds
like a hardware issue or possibly MikroTik made a change in their code that
now causes this problem.  MikroTik has been known to make a change in their
drivers (unknowingly) and render an entire revision of make and model
interface useless.  Happened to us with Intel SC Fiber adapters.

Best,


Brad




-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Sam Tetherow
Sent: Saturday, April 14, 2007 4:04 AM
To: WISPA General List
Subject: Re: [WISPA] Slow Internet across MT Router

Ron, when I was at 2xT1 I was running it through a RB230 without any issues for BW shaping (only a couple of queues). I don't think it is MT in particular that is the problem. Could be the specific hardware that is the issue though.

I am currently running 45MB through a 3.0GHz MT box with an SBE interface and it handles the bandwidth just fine, although I am having some locking problems from time to time, but I think they are related to the sbe DS3 card as opposed to MT itself.

    Sam Tetherow
    Sandhills Wireless

Ron Wallace wrote:
To All,
I have had a good system. I have a 3 Mbps Bonded T1, 100 users. Right now
when I run a speed test to Speakeasy, it starts at 2.6 or2.7 mbps and
quickly windsdown to 15-20 kbps. This is only in the evening and from 7-9AM.
I have a MikroTik in P3 900MHz, w/ 500Mb of ram.
Thisonlyhappens across theMikroTik box. Any ideas, Mycustopmers are pissed. Some Are threatening to quit.
PLEASE HELP, I'M A DUNCE.

Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220 Phone: (517)547-8410 Mobile: (517)605-4542 e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED]


--
WISPA Wireless List: [EMAIL PROTECTED]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to