Use a systemboard that has built-in GigE ports. The RB PCI card may be
your problem, as I have two very stable PC platform boxes with dual GigE
ports that will push over 600Mbps without a problem.
Travis
Microserv
Don Annas wrote:
Guys, I'm looking for a solid state, rack mountable hardware to run MikroTik
OS on. I need the device to be able to handle around 200 MB of actual
throughput. We use quite a few of the RB532s today and seem to cap out
around 40MB or so.
We have tried a few of the PC based platforms using Intel 915 boards and the
gig RB PCI cards. When testing with these, we do get minor packet loss that
we do not get on the 532s or our Cisco routers.
Any suggestions? Thanks.
_________________________
Don Annas
336.510.3800 x111
336.510.3801 fax
HYPERLINK "mailto:[EMAIL PROTECTED]"[EMAIL PROTECTED]
HYPERLINK "http://www.triadtelecom.com/"www.TriadTelecom.com
_________________________
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.472 / Virus Database: 269.8.0/819 - Release Date: 5/26/2007
10:47 AM
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
