Anyone getting the XR2's to work well?
With our initial StarOS V3 XR2 Beta Test, I found that a power setting of 10
would allow the card to associate, but a power setting of 11 or higher would
prevent association.
However, an SR2 inserted in place of, in the same system/link, out performed
the XR2, with higher Quality. The SR2 also would associate and function at
any allowable Power setting in StarOSV3.
We tried using both a WRAP board, and WAR2. Both 18V in WRAP and 18V and 24V
regulated power in WAR, no difference. We also tried hard sellecting
various Link Distance settings. (1,2,3 miles, with 2 miles working best for
the 1 mile test link) Note this was in what appeared to be a high noise
area, with significant Tree Leaves obstruction. Note, the ground of the
XR2 was screwed to case. I'm wondering if the XR2 is just noisier, or if
STAR OS just doesn't have appropriate drivers yet for it? Other... any
experience?
Disclaimer: This was strictly for capabilty testing purposes.
Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
