In Illinois here, it was 50* and now it's going to be 92 tomorrow.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
----- Original Message -----
From: "Zack Kneisley" <[EMAIL PROTECTED]>
To: "WISPA General List" <[email protected]>
Sent: Wednesday, June 06, 2007 12:34 PM
Subject: Re: [WISPA] Tranzeo not functioning properly
Ohio can be a bit difficult, one day snow, the next in the 80's
On 6/6/07, Mark Nash <[EMAIL PROTECTED]> wrote:
Over the past year we've installed about 100 of their CPQ-19s and I've
sent
3 back. Could it be your climate? We have very mild temperatures for
the
most part...neither really hot or really cold.
Mark Nash
UnwiredOnline.Net
350 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-5555
541-998-5599 fax
----- Original Message -----
From: "Zack Kneisley" <[EMAIL PROTECTED]>
To: "WISPA General List" <[email protected]>
Sent: Wednesday, June 06, 2007 10:23 AM
Subject: Re: [WISPA] Tranzeo not functioning properly
> Just my opinion, I've beat down tranzeo enough in the past to cover a
year
> or so, but Tranzeos are not built for durability or longevity. Our
company
> has experienced a 25% or more failure rate on their entire line of
products.
> Stu might tell you different though ;-)
>
> Zack
>
> On 6/6/07, Ryan Langseth <[EMAIL PROTECTED]> wrote:
> >
> > What firmware are you running, there was a bug where it would not
pass
> > traffic that was fixed in 3.0.4 of the firmware.
> >
> > We had some issues with the 58 FDD links, one was dropping connection
> > intermittently during the day, narrowing the channel down to 5mhz
> > made
> > it work alot better. I was pretty sure this problem is with the
> > distance of the link, when we purchased the FDD link the saleperson
told
> > us it would be able to go 10-13 miles. Turns out tranzeo recommends a
> > link distance of 5 miles.
> >
> > Ryan
> >
> > On Wed, 2007-05-30 at 16:47 -0400, RC wrote:
> > > Anybody have issues with Tranzeo 5.8 APs?
> > >
> > > We have had about 5 die out of 40. They don't die completely, but
don't
> > > pass all traffic.
> > > The wireless side seems to function good, but the Ethernet side is
> > > having problems.
> > >
> > > Anybody having similar issues?
> >
> > --
> > WISPA Wireless List: [email protected]
> >
> > Subscribe/Unsubscribe:
> > http://lists.wispa.org/mailman/listinfo/wireless
> >
> > Archives: http://lists.wispa.org/pipermail/wireless/
> >
> --
> WISPA Wireless List: [email protected]
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
