There have been some settings that get lost in the upgrades. Especially on 532s. Make sure you make a backup first to be on the safe side.
Dennis M. Burgess Mikrotik Certified Consultant Link Technologies, Inc., St. Louis, Missouri --WISP/Network Support Services-- +1 314-686-1302 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of rabbtux rabbtux Sent: Friday, February 15, 2008 2:02 PM To: WISPA General List Subject: [WISPA] Based on list comments I did a MT ROS upgrade... Hearing good things about routeros 3.2 I upgraded my office system. Big problem, look before you leap. I had an old soekris X86 client system with a prisim card talking to another 2.9.x system with an SR2 radio. I upgraded from 2.9.50, to 3.2 and ran into some issues, like my ethernet port(bridge) lost its address. Thats not too bad, but the RF link was out and out weird. When I pinged the AP from the upgraded client I would get 500% packet GAIN. Tons of dups. Anyway, in hindsight, Is there any problem with the new MT drivers and prisim radios? What is the best (read safest) way to upgrade? Sure glad this was just the office system, and only wasted my time versus network outages. Thanks all! Marshall Rabbit Meadows Technology ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/