I've used them for a few years now and can't recall seeing any of the larger sized bases come unglued from the enclosure.
I use these everywhere, all I use is boards and rootennas. The ones that have failed are the skinnier small based ones. I've seen that when it got too cold inside a nema enclosure the boards fall. This has happened multiple times. To fix that situation, we use caulk. We put a big wad of caulk at the base of the mount and stick it to the enclosure. If the enclosure is in use, I use strips of duct tape to hold everything in place till the caulk dries. If it's in a unit I'm building on the bench, and I've done this a lot to reuse old plastic mounts, is I just lay it down and let it cure, about 24hours or so. Brian Rohrbacher wrote: > Question was. Do they last? In the heat, in the cold?? > > [EMAIL PROTECTED] wrote: >> We don't use them that much anymore in the new product lines but we do have >> stock they are .25 each less than 100 and 20 each with 100+. You can call >> and talk to one of our sales reps to order just reference part number >> MF-SLAD250ADH. >> >> >> >> Sincerely, Tony Morella >> >> Demarc Technology Group, A Wireless Solution Provider >> >> Office: 207-667-7583 Fax: 207-433-1008 >> >> <http://www.demarctech.com> http://www.demarctech.com >> >> >> >> This communication constitutes an electronic communication within the >> meaning of the Electronic Communications Privacy Act, 18 USC 2510, and its >> disclosure is strictly limited to the recipient intended by the sender of >> this message. This communication may contain confidential and privileged >> material for the sole use of the intended recipient and receipt by anyone >> other than the intended recipient does not constitute a loss of the >> confidential or privileged nature of the communication. Any review or >> distribution by others is strictly prohibited. If you are not the intended >> recipient please contact the sender by return electronic mail and delete all >> copies of this communication >> >> >> >> >> >> >> >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >> Behalf Of Brian Rohrbacher >> Sent: Friday, February 15, 2008 4:00 PM >> To: WISPA General List >> Subject: Re: [WISPA] pcb Ask Tony Morella >> >> >> >> It was suppose to say Have you had a problem Tony? >> >> Brian Rohrbacher wrote: >> >> Demarctech has used them for a couple years. Have you had a problem. I >> have not had a problem with the ones in the Demarctech products. >> >> Brian >> >> Tom DeReggi wrote: >> >> Well, I'd rather ask... How have the adhesive backed mounts been working >> out? >> >> I'm afraid to use them. We use the little golden metal standoffs, bolt them >> in, and water proof. >> Afraid the board will come loose and short out, after significant heat or >> cold or moisture. >> Accident waiting to happen, a year down the road. >> >> How long are they holding up? >> >> Tom DeReggi >> RapidDSL & Wireless, Inc >> IntAirNet- Fixed Wireless Broadband >> >> >> ----- Original Message ----- >> From: "Brian Rohrbacher" <mailto:[EMAIL PROTECTED]> >> <[EMAIL PROTECTED]> >> To: "WISPA General List" <mailto:wireless@wispa.org> <wireless@wispa.org> >> Sent: Friday, February 15, 2008 10:29 AM >> Subject: Re: [WISPA] pcb >> >> >> >> >> Let me know when you order. They have a min order number. I got some a >> couple yrs ago and sold a bunch. I think you had to order 500-1000. >> Now I am a little low. I might take some off your hands if you don't >> want that many. >> >> Brian >> >> Travis Johnson wrote: >> >> >> Hi, >> >> Who sells the plastic 3M PCB with adhesive backing? Like for mounting >> routerboards inside cases? >> >> Travis >> Microserv >> >> >> ---------------------------------------------------------------------------- >> ---- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> ---------------------------------------------------------------------------- >> ---- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> >> ---------------------------------------------------------------------------- >> ---- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> ---------------------------------------------------------------------------- >> ---- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> >> >> ---------------------------------------------------------------------------- >> ---- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> ---------------------------------------------------------------------------- >> ---- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> >> >> >> _____ >> >> >> >> >> >> >> ---------------------------------------------------------------------------- >> ---- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> ---------------------------------------------------------------------------- >> ---- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -- George Rogato Welcome to WISPA www.wispa.org http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
